CMT 836.920.11 Chamfer Router Bit 1/2-Inch Shank, 1-3/4-Inch Cutting Diameter, 23/32-Inch Cutting Length, 45 Degree Cutting Angle

0 comments

Buy Cheap CMT 836.920.11 Chamfer Router Bit 1/2-Inch Shank, 1-3/4-Inch Cutting Diameter, 23/32-Inch Cutting Length, 45 Degree Cutting Angle


Buy Low Price From Here Now

CMT Chafer Bits but clean, accurate bevels and chamfers that are great for edge work or to make perfectly aligned multi-sided containers, boxes and other decorative projects. Can be used to work larger scale projects such as beams and columns with excellent results.
Readmore

Technical Details

- D=1-3/4"
- I=5/8"
- A=45 DEGREE
- S1/2"
See more technical details
Customer Buzz
 "Great Bit" 2010-03-08
By Timothy D. Ulmen (Seattle WA)
I bought a cheap set of bits and decided to replace the ones I wore out first with good bits. This was one of the first that got replaced and the it has lasted and lasted with lots of use. Not to mention that the cuts are so much cleaner than the cheaper ones. I've used lots of brands but this one is one of the best.


Images Product

Buy CMT 836.920.11 Chamfer Router Bit 1/2-Inch Shank, 1-3/4-Inch Cutting Diameter, 23/32-Inch Cutting Length, 45 Degree Cutting Angle Now

Amana Tool 45790 Raised Panel 'V' Joint 1-3/8-Inch Diameter by 1-37/64-Inch Cutting Height by 1/2-Inch Shank Router Bit

0 comments

Buy Cheap Amana Tool 45790 Raised Panel 'V' Joint 1-3/8-Inch Diameter by 1-37/64-Inch Cutting Height by 1/2-Inch Shank Router Bit


Buy Low Price From Here Now


Readmore

Technical Details

- Glue seam is far less evident on the bevels of raised panels with this bit.
- Carbide Tipped, Industrial Quality
- 1/2-Inch Shank
- 1-3/8 Diameter, 1-37/64-Inch Cutting Height, 80 Degree
- For use only in a table mounted router.
See more technical details

Images Product

Buy Amana Tool 45790 Raised Panel 'V' Joint 1-3/8-Inch Diameter by 1-37/64-Inch Cutting Height by 1/2-Inch Shank Router Bit Now

Templaco MS-400 Multi-Strike Template - 16" Carrier w/ 2 Deadbolt, 1 Full Lip and 1 "T" Pocket

0 comments

Buy Cheap Templaco MS-400 Multi-Strike Template - 16" Carrier w/ 2 Deadbolt, 1 Full Lip and 1 "T" Pocket


Buy Low Price From Here Now


Readmore

Technical Details

- Of 1" X 2-1/4" Deadbolt, 1" X 2-1/4" Full-Lip, 1-1/8" X 2-3/4" T And 1-1/8" X 2-3/4" Deadbolt
- Includes 2 Center Locators And Attaching Nail Assemblies
- Tack-On Template Will Produce 4 Strike Mortises With Finish Sizes
See more technical details
Customer Buzz
 "Time Saving 101" 2008-11-22
By J. M. Melhorn (Lewisberry, PA United States)
I have never been a fan of pre hung doors. They always raddle when they are shut because the door stop is pre-assembled. Many people call me old fashion for buying door slabs, jam legs and building everything on site, but my end product is superior. This knowledge and experience with door slabs lends itself to a competitive edge in upgrade and retrofit jobs, putting new slabs in old jams.

I have a porter-cable hinge template and a schlage door boring jig. This was a natural next buy, especially since schlage has started only sending the radius plates with some of their knobsets. If you are going to be doing more than one door, spend the money and buy the Templaco templates. Don't even think of buying that cheap thing Porter Cable makes. I had one. It lasted two doors before the plastic broke.


Images Product

Buy Templaco MS-400 Multi-Strike Template - 16" Carrier w/ 2 Deadbolt, 1 Full Lip and 1 "T" Pocket Now

CMT 855.801.11 Window Sash Set, 1-3/8 and 1-1/2-Inch Cutting Diameters, 22mm Bearing

0 comments

Buy Cheap CMT 855.801.11 Window Sash Set, 1-3/8 and 1-1/2-Inch Cutting Diameters, 22mm Bearing


Buy Low Price From Here Now

CMT designed this set so you can create window sashes that are as beautiful as they are functional. As an additional feature, the CMT Window Sash set will also mill perfectly joining 1-3/8" rail and stile parts for custom made doors. Like all CMT quality bits, this set includes our anti-kickback design feature and our trademark orange PTFE Industrial Coating. Made of Fatigue Proof® steel with carbide tips for longer life. Each set contains one 1-1/2" bit and one 1-3/8" bit designed for cutting 1-3/8" stock. Sold only as a set. Individual items not available separately. See pages 84 and 85 for Window Sash Construction Instructions
Readmore

Technical Details

- Premium tungsten carbide tipped
- Industrial PTFE orange coating
- Fatigue proof steel
See more technical details

Images Product

Buy CMT 855.801.11 Window Sash Set, 1-3/8 and 1-1/2-Inch Cutting Diameters, 22mm Bearing Now

Freud 50-509 3/4-Inch Top and Bottom Bearing Flush Trim Bit

0 comments

Buy Cheap Freud 50-509 3/4-Inch Top and Bottom Bearing Flush Trim Bit


Buy Low Price From Here Now

Freud 50-509 3/4-Inch Top and Bottom Bearing Flush Trim BitApplication: Trimming laminate counter tops and doing pattern workFreud 50-509 3/4-Inch Top and Bottom Bearing Flush Trim Bit Features:; Double bearing design allows you to choose the cutting direction that best suits your work piece.; Freud's Top & Bottom Bearing Bits let you rout half the curve in one direction, flip the work piece over and rout the other half in the opposite direction without repositioning your pattern.; Perfect for templates placed above or below the work piece, or to trim laminates or veneer perfectly flush with countertops, shelving and other projects.; Cuts all hardwoods, softwoods, plastic laminates and veneered plywood.; Use on hand-held routers, laminate trimmers, and table-mounted portable routers.; Double bearing design allows you to choose the cutting direction that best suits your worked piece; Lets you rout half the curve in one direction, flip the work piece over and rout the other half in the opposite direction without repositioning your pattern; Perfect for templates placed above or below the work piece, or to trim laminates or veneer perfectly flush with countertops, shelving and other projects; Cuts all hardwoods, softwoods, plastic laminates and veneered plywood; Use on hand-held routers, laminate trimmers, and table-mounted portable routersFreud 50-509 3/4-Inch Top and Bottom Bearing Flush Trim Bit Specifications:; Overall Dia.(D): 1/2"; Bearing Dia. (B): 1/2"; Carbide Height(h): 1-1/4"; Shank Dia.(A): 1/4"; Overall Length(H): 3-5/16"
Readmore

Technical Details

- Ideal for lettering or other template work where the piece is being grooved or routed out
- Provides precision cuts in almost any trimming or pattern routing application
- Made from hi-density carbide with titanium for long life and a flawless finish
- For use with hand-held and table-mounted portable routers
- 3/4-inch diameter trim; 1-5/8-inch carbide height; 1/2-inch shank
See more technical details
Customer Buzz
 "Great bit holds a sharp edge" 2010-03-24
By Huskie (Dekalb, IL USA)
I used this bit to cut my corian countertops. This thing got a ton of use and never got dull.

I probably made between 750 -1000 linear feet in cuts and the first cut was as good as the last. It also worked great for rounded and detail cuts. I never had a problem with chatter, which also had to do with having a good router to work with.

Customer Buzz
 "End all be all trim bit" 2008-10-16
By TimBo (SE Michigan)
This is one workhorse of a bit. Using my Milwaukee router, I've fed this bit everything from 1/2" MDF to 1-1/2" oak. No burn marks, no vibration, just smooth straight cuts everytime. Well worth the money.

Customer Buzz
 "Flush trim bit." 2006-11-05
By Chris R. Speaker
Good quality bit that is sharp from the factory, cuts clean, and follows every last contour on the template. The dual bearings are nice in that the template can be at the top or bottom of the work piece without having to change/buy a new bit.


Images Product

Buy Freud 50-509 3/4-Inch Top and Bottom Bearing Flush Trim Bit Now

CMT 854.502.11 Bull Nose Router Bit 1/2-Inch Shank, 7/8-Inch Overall Diameter, 3/4-Inch Cutting Length

0 comments

Buy Cheap CMT 854.502.11 Bull Nose Router Bit 1/2-Inch Shank, 7/8-Inch Overall Diameter, 3/4-Inch Cutting Length


Buy Low Price From Here Now


Readmore

Technical Details

See more technical details

Images Product

Buy CMT 854.502.11 Bull Nose Router Bit 1/2-Inch Shank, 7/8-Inch Overall Diameter, 3/4-Inch Cutting Length Now

Makita 733012-1A Router Bit Top Ball Bearing Straight 1/2-Inch

0 comments

Buy Cheap Makita 733012-1A Router Bit Top Ball Bearing Straight 1/2-Inch


Buy Low Price From Here Now


Readmore

Technical Details

- The replacement bearing is part number 733132-5A
- Overall length is 2 1/2 inches
- 1/4-inch shank
- 1/2-inch wide cut
See more technical details
Customer Buzz
 "Deceptive picture" 2010-03-03
By Randall C. Bowman
While a very good quality router bit, it is totally disimilar to the picture. The bit that came cuts a full 1" deep. I needed the one as pictured, which looks like one you'd use for hinge mortising, and as you can see, it is not the same.


Images Product

Buy Makita 733012-1A Router Bit Top Ball Bearing Straight 1/2-Inch Now